Coast Guard CFR 182.530 requires vessels
carrying “Passengers for Hire” to be equipped
with high bilge water alarms. This is a strong recommendation
for private vessels carrying “Passengers for
Fun”
ABYC: “H-22 ELECTRIC BILGE PUMP
SYSTEMS- 22.7.3 On boats with an enclosed accommodation
compartment, an alarm shall be installed indicating
that bilge water is approaching the maximum bilge
water level”. As of July 2005 |
SENTINAL
I HIGH WATER BILGE ALARM
Price:
$79.00
|
| |
| |
| 95
dB SONIC AND VISUAL INDICATION WITH 9V BATTERY BACKUP.
OUTPUT FOR REMOTE ALARM, SUCH AS FLYBRIDGE LOCATION.
FLOAT SWITCH PROVIDED.
|
Have
you heard this one? “We didn't know there was
a problem until the floor boards started floating".
Boat
develops a leak from bad packing gland or broken though
hull fitting. You don't hear the bilge pump running
or see the discharge. Before you know it, floating
floorboards or worse. Experts agree, identifying the
leak quickly greatly increases the chance of saving
the boat.
SENTINEL
high water alarm is also equipped with 9 V battery
back up. Even unattended boat, with power turned off,
is protected. If water intrusion should occur this
valuable feature can warn marina personal.
Did you know that for every boat that sinks under
way, four sink at the slip? |
| |
|
 |
|
 |
For
every 1 boat that sinks underway, 4 sink in
their slips. Failed thru-hull fittings the most
common problem
|
|
40
Ft. Sail boat sank at anchor. Anchor no longer
needed |
|
|
| |
| |
|
If it lives in the bilge, keep it simple
and rugged. That's just what our high water alarm
float is! Polypro float switch housed in a heavy wall
splash guard. Square profile for easy mounting. All
electrical connections are potted water tight. Float
provided with 15 Ft. of tinned, stranded, marine grade
cable. 3M DUALOCK tape mounting system. No need
to drill holes in bilge gelcoat. Will function
up to 75 degree angle from vertical. Front slit provided
for easy manual function testing. Removable bottom
cover for maintenance. Measures 2" square x 3"
tall. |
OPTIONAL BILGE
PUMP OVERRUN ALARM MODULE
WITH REMOTE “BILGE PUMP ON” INDICATIOR
LIGHT |
|
Sounds bilge alarm if bilge pump runs
too long. Adjustable time delay from
20 sec to 2 min in 20 second increments. Supplied
with remote indicator light and label to be mounted
at helm station(s). Requires current bilge pump is
equipped with On, Off, Auto three way switch. |
|
|
Bilge pump over run alarm module
$46.00 – BUY
NOW >>
Optional second bilge pump on indicator
lamp for second helm station
$13.00 – BUY
NOW >>
SEE
RAW WATER ALARM FOR REMOTE ALARM OPITIONS
|
| |
|
| |
|
| |
|
| |
toll
free 800 824 4449 |
| phone:
(510) 864-0237• fax: (510) 931-6740 |
| Alameda,
California, USA GMT + 8 hrs |
|
| |
| |
